|
|
أدوات الموضوع |
![]() |
#11 |
Guest
|
![]()
Polymer batch numbers are linked to the manufacturers material certificate Discrete batches of polymer are not mixed. The bach number of the polymer used is recorded on the moulding log sheet against a specific mould reference. FPA lined valve testing, The PFA we use meets the requirements of ASTM D3307 Type 2. They are also specified as having a restricted melt flow index not exceeding 3 grammes in 10 miniutes. We extensively use our own in house melt flow indexing test equiment to ensure the PFA Lined valve complies to our strict quality controls.
|
![]() |
#12 |
Guest
|
![]()
China PFA lined valve manufacturer has chosen to use steel castings lined with high molecular weight PFA’s for its lined fittings. The reasons for this are technical and not cost driven. The use of PFA in castings provides the best combination of lining performance, housing strength and consistency.
|
![]() |
#13 |
Guest
|
PFA for valve
China PFA lined valve manufacturer has chosen to use steel castings lined with high molecular weight PFA’s for its lined fittings. The reasons for this are technical and not cost driven. The use of PFA in castings provides the best combination of lining performance, housing strength and consistency.
|
![]() |
#14 |
Guest
|
![]()
PFA lined valve of PFA is very similar in composition to the fluoropolymers PTFE and FEP (fluorinated ethylene-propylene). PFA and FEP both share PTFE's useful properties of low coefficient of friction and non-reactivity, but are more easily formable. FEP is softer than PTFE and melts at 260 °C; it is highly transparent and resistant to sunlight.
|
![]() |
#15 |
Guest
|
![]()
PFA lined valve of PFA is very similar in composition to the fluoropolymers PTFE and FEP (fluorinated ethylene-propylene). PFA and FEP both share PTFE's useful properties of low coefficient of friction and non-reactivity, but are more easily formable. FEP is softer than PTFE and melts at 260 °C; it is highly transparent and resistant to sunlight.
|
![]() |
#16 |
Guest
|
![]()
Most rubber lined valve is vulcanized, a process which involves heating with a small quantity of sulphur (or ********************alent cross-linking agent so as to stabilise the polymer chains, over a wide range of temperature. This discovery was made by Charles Goodyear in the 1844, but is a process restricted to polymer chains having a double-bond in the backbone. Such materials include natural rubber and polybutadiene. The range of materials available is much wider however, since all polymers become elastomeric above their glass transition temperature. However, the elastomeric state is unstable because chains can slip past one another resulting in creep or stress relaxation under static or dynamic load conditions. Chemical cross links add the stability to the network that is needed for most practical applications.
|
![]() |
#17 |
Guest
|
![]()
PFA lined ball valve of PFA is very similar in composition to the fluoropolymers PTFE and FEP (fluorinated ethylene-propylene). PFA and FEP both share PTFE's useful properties of low coefficient of friction and non-reactivity, but are more easily formable. FEP is softer than PTFE and melts at 260 °C; it is highly transparent and resistant to sunlight.
|
![]() |
#18 |
Guest
|
![]()
Gore-Tex is a material incorporating fluoropolymer membrane with micropores. The roof of the Hubert H. Humphrey Metrodome in Minneapolis is one of the largest applications of Teflon PTFE coatings on Earth, using 20 acres (81,000 m2) of the material in a double-layered, white dome, made with PTFE-coated fiberglass, that gives the stadium its distinctive appearance. The Millennium Dome in London is also substantially made of PTFE for PTFE lined ball valve
|
![]() |
#19 |
Guest
|
Wafer-style butterfly valves
The wafer style PTFE lined butterfly valve is designed to maintain a seal against bi-directional pressure differential to prevent backflow in systems designed for unidirectional flow. It accomplishes this by using a tightly fitting seal, i.e., gasket, o-ring, precision machined, and a flat valve face on the upstream and downstream sides of the valve.
|
![]() |
#20 |
Guest
|
![]()
The wafer style PTFE lined butterfly valve is designed to maintain a seal against bi-directional pressure differential to prevent backflow in systems designed for unidirectional flow. It accomplishes this by using a tightly fitting seal, i.e., gasket, o-ring, precision machined, and a flat valve face on the upstream and downstream sides of the valve.
|
مواقع النشر (المفضلة) |
الكلمات الدلالية (Tags) |
بايخ |
الذين يشاهدون محتوى الموضوع الآن : 1 ( الأعضاء 0 والزوار 1) | |
|
|